Switch Statements And Switch Expressions In Java: The differences
1. Introduction
Among the control flow statements in Java, Switch is arguably the most delicate. Many programmers, even the most experienced, have difficulty mastering the different options of the Switch statement. In this article, you will find out everything you need to know about that statement. You will learn about Switch Statements, Switch Expressions, and their differences.
Affiliate Disclosure
This post contains affiliate links. If you purchase through these links, I may earn a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.
2. What is The Switch Construct?
The Switch Construct implements a multi-way branch that allows your program to be transferred to a specific entry point in the code of the switch block, based on an input variable. There are two types of switch constructs in Java: the switch statement and the switch expression. Each of these constructs can be written in two ways: using the colon(:) notation and using the arrow(->) notation.
3. The Switch Statement
3.1. The Switch Statement With The Colon Notation (:)
This statement allows the programmer to choose between several alternative actions, depending on a parameter. Its syntax is as follows:
switch(selector_expression){
case value1: statements_value1
case value2: statements_value2
....
case valueN: statements_valueN
default: statements_default
}
- selector_expression must be an expression returning a value of the following data type:
- A primitive data type: char, byte, short, or int
- A wrapper class: Character, Byte, Short, or Integer
- An Enum type
- A String(Since Java 7)
- value1, value2, ... valueN must be type-compatible with selector_expression.
- statements_value1, statements_value2, ... statements_valueN can be a single statement, a group of statements, or a block statement.
- The default block will be executed if none of the constants matches the input value.
- The case constants can appear in any order in the switch block. For instance, the default can be the first:
switch(selector_expression){
default: statements_default
case value1: statements_value1
case value2: statements_value2
....
case valueN: statements_valueN
}
When different case labels have a common action, they can be grouped like this:
Multiple Case Labels with a Common Action
switch(selector_expression){
case value1: statements_value1
case value2: case value3: case value4: statements_value1_2_3
....
case valueN: statements_valueN
default: statements_default
}
Or like this:
Single Case Label, multiple constants with a Common Action
switch(selector_expression){
case value1: statements_value1
case value2, value3, value4: statements_value1_2_3
....
case valueN: statements_valueN
default: statements_default
}
Example of Switch Statement with The Colon Notation
int value = 5;
switch (value){
case 1:
System.out.println("Value is 1");
case 2:
System.out.println("Value is 2");
case 5:
System.out.println("Value is 5");
default:
System.out.println("Value doesn't match any of the constants");
}
If you run the code above, you will get the following output:
Value is 5
Value doesn't match any of the constants
You should know that once the switch statement with the colon notation finishes executing the block of code corresponding to the input constant, it moves down (fall-through) to the next constant. To avoid that, you should use a break to take the execution flow out of the switch construct.
int value = 5;
switch (value){
case 1:
System.out.println("Value is 1");
break;
case 2:
System.out.println("Value is 2");
break;
case 5:
System.out.println("Value is 5");
break;
default:
System.out.println("Value doesn't match any of the constants");
}
Always remember to use the break statement in your switch constructs with a colon notation to avoid unexpected behaviour.
3.2. The Switch Statement With The Arrow(->) Notation
The syntax of this form of the switch statement is shown below:
switch(selector_expression){
case value1 -> statements_value2
case value2: statements_value2
....
case valueN: statements_valueN
default: statements_default
}
Compared to the colon notation construct, you have the following points of difference to note:
Multiple case labels are not allowed
The arrow notation does not allow multiple case labels to be associated with the same action, unlike the colon notation.
The code below will not compile:
int value = 5;
switch (value){
case 1 -> System.out.println("Value is 1");
case 2 -> case 3 -> System.out.println("Value is 2");//Not allowed
case 5 -> System.out.println("Value is 5");
default -> System.out.println("Value doesn't match any of the constants");
}
To get around this, you can specify a single case label with a list of constants:
int value = 5;
switch (value){
case 1 -> System.out.println("Value is 1");
case 2, 3 -> System.out.println("Value is 2");//This is OK
case 5 -> System.out.println("Value is 5");
default -> System.out.println("Value doesn't match any of the constants");
}
Actions associated with a case label are limited
You cannot use a group of statements in an arrow notation switch.
This will not compile:
int value = 5;
switch (value){
case 1 ->
System.out.println("Value is 1");
System.out.println("This line will not compile");//Not allowed
case 2, 3 -> System.out.println("Value is 2");
case 5 -> System.out.println("Value is 5");
default -> System.out.println("Value doesn't match any of the constants");
}
You can only use one of the following actions:
case 2, 3 -> System.out.println("Value is 2");
- A block of statements
case 1 ->{
System.out.println("Value is 1");
System.out.println("This line will compile");
}
- Throw an exception
default -> throw new IllegalArgumentException("Not a valid value");
The Arrow Switch Execution is Mutually Exclusive
Unlike the colon notation switch, there is no need for a break statement. Once the execution of the statements associated with a case label has been completed, the switch construct also terminates(no fall-through).
Full Example of The Arrow Notation Switch
int value = 5;
switch (value){
case 1 ->{
System.out.println("Value is 1");
System.out.println("This line will compile");
}
case 2, 3 -> System.out.println("Value is either 2 or 3");
case 5 -> System.out.println("Value is 5");
default -> throw new IllegalArgumentException("Not a valid value");
}
Using Strings as Case Constants
Starting from Java 7, you can use the String data type in your switch constructs. However, there are a couple of things you should be aware of while switching on Strings.
- The Java compiler compares the string constants based on their hash values first(integer values), followed by an object equality (using the
equals()method) to rule out any collision. - Switching on strings is less efficient than switching on integers. Therefore, you must only switch on strings if the values are already of type
String. - The compiler must be able to determine the value of all the case constants at compile-time.
Correct Example of Switching on Strings
Find below an example of a switch statement using String constants.
String color = "blue";
final String YELLOW = "yellow";
switch (color){
case "red" -> System.out.println("Color is red");
case "blue" -> System.out.println("Color is blue");
case YELLOW -> System.out.println("Color is yellow");
default -> throw new IllegalArgumentException("Not a valid color");
}
Incorrect Way of Switching on Strings
The following example will not compile because the compiler cannot guarantee that the value of the case constants will not change at runtime.
String color = "blue";
String YELLOW = "yellow";
String RED = new String("red");
switch (color){
case RED -> System.out.println("Color is red");//Compile-time error, RED is not a constant
case "blue" -> System.out.println("Color is blue");
case YELLOW -> System.out.println("Color is yellow");//Compile-time error, YELLOW is not a constant
default -> throw new IllegalArgumentException("Not a valid color");
}
Using Enum as Case Constants
An enum type is a special data type that enables for a variable to be a set of predefined constants. We'll talk about this in a future article. For now, you should know that this data type has been introduced since Java 5 and since then can be used as a constant in switch constructs.
Here are the key points you need to remember when it comes to using the Enum data type in a switch:
-
The Java compiler assigns a unique integer value to each enum constant. Switching on enum values is based on equality comparison on that integer value.
-
The enum constants must be of the same type as the selector expression.
-
You must not use the fully qualified name when specifying the enum constants.
Correct Example of Switching on Enum Values
enum Color {BLUE,RED,YELLOW}
public static void main(String[] args) {
Color color = Color.BLUE;
switch (color){
case RED -> System.out.println("Color is red");
case BLUE -> System.out.println("Color is blue");
case YELLOW -> System.out.println("Color is yellow");
default -> throw new IllegalArgumentException("Not a valid color");
}
}
Incorrect Way of Switching on Enum Values
The code below will not compile because the case constant RED is using a fully qualified name.
enum Color {BLUE,RED,YELLOW};
public static void main(String[] args) {
Color color = Color.BLUE;
switch (color){
case Color.RED -> System.out.println("Color is red");//Compile-time error
case BLUE -> System.out.println("Color is blue");
case YELLOW -> System.out.println("Color is yellow");
default -> throw new IllegalArgumentException("Not a valid color");
}
}
4. The Switch Expression
A Switch expression has the same semantics as a switch statement, with the difference that it returns a value. Just like switch statements, there are two forms of switch expressions: Colon notation and Arrow notation switch expressions.
4.1. The yield Statement
In switch expressions, the yield statement plays a similar role to break in switch statements. The yield statement can only be used in switch expressions.
yield expression;
Execution of the statement above will return the value of expression as the result of the switch expression.
4.2. The Switch Expression With The Colon(:) Notation
The switch expression with the colon notation is analogous to the switch statement with the colon notation with the difference that it returns a value (or throws an exception).
dataType switchValue = switch(selector_expression){
case value1: statements_value1;
yield someValue1;
case value2: statements_value2;
yield someValue2;
....
case valueN: statements_valueN;
yield someValueN;
default: statements_default;
yield someDefaultValue;
}
- dataType is the data type of switch expression value
- yield is used to return a value to the switch expression.
- Just like the switch statement, if there is no yield at the end of the group of statements, the execution will fall through the next group, if any.
- The switch expression with the colon notation must be exhaustive, meaning that the case labels, and if necessary the default label, must cover all values of the selector expression type. Failure to cover all values will result in a compile-time error.
The default label is usually used to make sure the switch expression is exhaustive.
Below is an example of the switch expression with colon(:) notation:
int value = 5;
int switchValue = switch(value){
case 1:
System.out.println("Value is 1");
yield 1;
case 2:
System.out.println("Value is 2");
yield 2;
case 3,4:
System.out.println("Value is 3 or 4");
yield 3;
default:
System.out.println("Value not in range");
yield 0;
};//Don't forget the semicolon (;)
System.out.println(switchValue);
Note that since the switch expression return a value into a variable, you must add a semicolon(
after the closing curly brace (}).
4.3. The Switch Expression With The Arrow(->) Notation
The switch expression with arrow notation is simply a switch statement with the arrow notation that returns a value(or throws an exception). Its syntax is as follows:
dataType switchValue = switch(selector_expression){
case value1 -> statements_value1;
yield someValue1;
case value2 -> statements_value2;
yield someValue2;
....
case valueN -> statements_valueN;
yield someValueN;
default -> statements_default;
yield someDefaultValue;
}
Find the list of important points to note below:
- The execution of the switch rules in a switch expression is mutually exclusive, just like in switch statements. Once the action in the switch has completed its execution, the value is returned to the switch expression and the switch body terminates. There is no fall-through.
- Unlike switch statements, the action body is not limited to expression statements. In addition to using a statement block, or throwing an exception, you can use any type of expression.
case 1 -> 1;//simple expression, must return a valid value directly
case 2 -> yield 2; //compiled-time error, yield is not allowed here
case 3 -> {//statement block
System.out.println("Value is 3");
yield 3;
}
case 4 -> {//statement block
yield 4;//Compiled-time error, yield must be the last statement in the block
System.out.println("Value is 4");
}
default -> throw new IllegalArgumentException("Not a valid value");
- The switch statement with the arrow notation must also be exhaustive. All possible selector values must be covered.
Example of Switch Expression with the Arrow(->) Notation
int value = 3;
int switchValue = switch(value){
case 1 ->{
System.out.println("Value is 1");
yield 1;
}
case 2-> 2;
case 3,4->{
System.out.println("Value is 3 or 4");
yield 3;
}
default->
throw new IllegalArgumentException("Not a valid value");
};
System.out.println(switchValue);
Executing this program will produce the following output:
Value is 3 or 4
3
5. Conclusion
In this article, you learned the switch construct in Java. You have discovered the main differences between the switch statement and the switch expression. You also learned the difference between the colon(:) notation and the arrow(->) notation.
Do you want to learn more about flow control statements in general? Check out this article.
6. References
- OCP Oracle Certified Professional Java SE 17 by Khalil A. Mughal and Vasily A. Strelnikov
- Oracle Java Documentation
The original article was published here on https://nkamphoa.com
